How to Setting BIOS Acer Laptop to install the operating system, for you who want to replace or install a new operating system either Windows or Linux or any other operating system then must set the Boot Priority Order in the BIOS first.
What is a BIOS?
A program that executes the MBR (Master Boot Record) which is in the first sector of the hard drive, aiming to call Operating System and run it.
For laptop or computer by default installed Windows 8 / 8.1 (Pre-Install) should disable UEFI secure boot on.
Principles and look almost similar to the UEFI BIOS.
Here are the steps:
- Turn on the laptop, press the F2 key when it appears "Press F2 to enter setup" in the bottom left corner. Each computer is certainly no indication of any brands enter the bios when the computer first turns on. In this case Acer using the F2 key.
- Well now you are in the BIOS interface.
- Press the right navigation button leading to the Boot menu.
- See the functions button to the right of the screen. If you are not a Acer laptop or a different version of the BIOS, there will be instructions on the right side of the screen even though in English.
- Before changing anything. Make sure you note or memoto the boot sequence, it would be useful if you have finished the installation, or if you forgot.
- On the Boot menu will appear the types of devices are bootable. If no name means the device has been detected by the Bios. Which device you want to boot? From CDROM or flash?
ATAPI CDROM: - internal cdrom
USB CDROM: - for external cdrom
USB HDD: - for bootable pendrive
Please note! When you attach an external boot device, plug the USB cable to the port USB1 or USB2 ports, do not plug the USB3 ports (colored blue on the left) - Edit the Boot Priority Order. In this step we move the device to the top order. Move the boot device that is going on to the top of / NO. 1 by pressing F6 and F5 (F5 and F6 to increase to decrease).
- Press F10 to save and exit.
- Let the flame laptop as usual and it will boot to the device in question.
- 10 If you have already successfully installed the operating system back to normal boot sequence (step 5), when you forget the starting position, put HDD0 comes out on top.
0 comments:
Post a Comment